Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Software Tools
4-10
NOTE
Do not disconnect the
power or network cable during the update process.
NOTE
This device supports firmware automatic recovery function. If the firmware in the device is corrupted, the
system will load the backup firmware automatically to overwrite the corrupted one. When
the system is in
recovery mode, the RDY LED will slowly blink red. DO NOT DISCONNECT the power cable when the recovery
process is underway. After the recovery process is complete, you can update the firmware again.
CAUTION
If you d
owngrade the device to firmware version v1.0.0, IOxpress will not be able to access the device. In
this case, p
lease connect to the device via a web service instead.
INFORMATION
The update process cannot be canceled after "Update" is
clicked.
INFORMATION
Back
up the configuration file before updating the device firmware.
NOTE
Configurations saved when using v1.0/v1.1 firmware may not be compatible with v1.2 firmware. Please
back up the configuration file before upgrading the
firmware.
Security
The Security section allows you to manage the security policy of the device.
NOTE
Do not
expose the device to the public Internet without any security protection. To increase the security of
the device, we suggest configuring security settings prior to other settings.
Service Settings
Enable/disable services to prevent unwanted access. The default configuration has Web Server via HTTP and
IOxpress/MCC Tool/MXIO enabled.

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English