ioThinx 4510 Series Quick Start Guide
The connection status page lists the connection information from other hosts.
Some browsers may create more than one Web
Https connection at the beginning. Once the connection is
established, the browsers will
only keep one and drop the others. Thus, it is normal that more than one Web
is listed in the table at the beginning.
Exiting Safe Mode Status
This device has a watchdog service to monitor the status of the pre-defined TCP connection (refer to
Account Settings for detailed settings). If the pre-defined TCP connection has no response for a
designated period, the device will enter the safe mode status. To exit safe mode status, if auto clear safe
mode is disabled in the watchdog settings, log in to the device’s Web Console and click the Exit Safe Mode
button to revert the device back to normal mode after the Modbus connection has reconnected.
Maintaining the Unit
This section introduces the maintenance functions of the ioThinx 4510 Series.
Backing up Configuration Files
This device can only be configured through the web console. After configuration, the configuration file can
be retrieved from the device to perform backup and mass deployment. Follow the steps to retrieve the
configuration file from the device.
Step 1: Go to the configuration page via Menu System Configuration
Step 2: Click Download from Get from Device and choose the location to save the .cfg file.
To Next Page
Loading...
Need help?
General
