Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Appendix
A-13
HTTP Status Code Moxa Status Code/Description User message
400 Bad Request 202 InvalidNodeValue One of the node value is
invalid.
400 Bad Request 203 WrongChannelOrder The I/O channels are
disordered.
400 Bad Request 204 MissingRequiredChannel A required channel index was
not specified in the request
body.
400 Bad Request 206 MissingRequiredNode A required node was not
specified in the request body.
400 Bad Request 300 ContentFailed One of the channel contents in
the request could not be set.
Please refer to the detailed
information.
400 Bad Request 301 ContentFailedToSet The content in the request
could not be set (invalid value).
200 OK N/A
404 Bad Request N/A
405 Method Not Allowed N/A
MQTT Rules
Publish Topic
Topic Description Category Trigger
{deviceName}/read/device/deviceName device name attribute Interval
{deviceName}/read/device/deviceLocalDateTime device local date and
time
attribute Interval
{deviceName}/read/device/deviceUpTime device up time attribute Interval
{deviceName}/read/device/firmwareVersion firmware version attribute Interval
{deviceName}/read/device/serialNumber serial number attribute Interval
{deviceName}/read/device/systemError system error attribute Interval
{deviceName}/read/network/lanMac/1 MAC address attribute Interval
{deviceName}/read/network/lanIp/1 IP address attribute Interval
{deviceName}/read/lastWill Last Will Topic attribute Interval
{deviceName}/read/{ioName}/birValue BIR - value attribute both
(OnChange)
{deviceName}/read/{ioName}/wirValue WIR - value attribute Interval
{deviceName}/read/{ioName}/dirValue DIR - value attribute Interval
{deviceName}/read/{ioName}/firValue FIR - value attribute Interval
{deviceName}/read/{ioName}/spStatus SP - system power
Status
attribute Interval
{deviceName}/read/{ioName}/spLowerLimitValue SP - system power
lower limit value
attribute Interval
{deviceName}/read/{ioName}/spUpperLimitValue SP - system power
upper limit value
attribute Interval
{deviceName}/read/{ioName}/fpStatus FP - Field Power Status attribute Interval
{deviceName}/read/{ioName}/diMode DI - mode (0: DI, 1:
Counter)
attribute Interval
{deviceName}/read/{ioName}/diStatus DI - DI mode - status
(0: OFF, 1: ON)
value both
(OnChange)

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English