Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Preface
1-4
WARNING
This unit is sensitive to Electrostatic Discharge, which can cause internal damage and affect operations.
Follow these guidelines when you handle this unit:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wristband.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the device in appropriate static-safe packaging when not in use.
WARNING
Check the voltage supplied by the power source. Make sure the voltage provided by the power source
matches the voltage required by the device.
WARNING
Check the voltage or current of the sensors or loads. Make sure the voltage and/or current indicated on the
sensors or loads corresponds to the specifications of your 45M module before you connect the device.
WARNING
Connect your device to an earthed ground.
CAUTION
Do not use the device if the device is already damaged. Replace defective or damaged devices to ensure
that your devices function pr
operly.
CAUTION
Do not attempt to repair the device yourself. If your device needs to be repaired, return the device to
Moxa’s customer service department. Attempting to repair the device yourself could invalidate the
device’s
warranty.
Additional Resources
Refer to the following documents for additional information.
• Datasheets for the following products:
 ioThinx 4510 Series
 ioThinx 4500 Series (45MR) Modules
• User’s Manual for the following products:
 ioThinx 4500 (45M) Module Series
 Moxa CLI Configuration Tool

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English