Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Quick Start Guide
5-9
Mass-deploying the Settings
The mass-deploying function can be performed by IOxpress utility. IOxpress is a Windows utility and the
system requirements are listed below:
OS Microsoft Windows 2000, XP or later
CPU Intel Pentium 4 CPU or higher
RAM Min. 512 MB, 1024 MB is recommended
Network 10/100 Ethernet
NOTE
The
ioThinx 4510 Series is only compatible with IOxpress v2.4 or later.
INFORMATION
To
get the latest version of IOxpress, please download it from www.moxa.com
Users can change IP address, update configurations, change the device name, and set the date and time to
multiple units by IOxpress. Before starting to use the mass-deploying function, please complete the
following steps to search for all devices first.
Step 1: Make sure the IOxpress service is enabled in Security  Service Settings.
Step 2: Connect the devices by Ethernet cables and then power them on.

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English