Moxa Technologies ioThinx 4510 Series - Configuring I;O Settings; Configuring Modbus Address Settings

ioThinx 4510 Series Quick Start Guide
5-7
Configuring I/O Settings
Click I/O on the menu panel to enter the I/O settings page. For more detailed information, please refer to
the I/O Settings chapter.
Configuring Modbus Address Settings
Click Modbus on the menu panel to enter the Modbus TCP Slave setting page. On this page, users can see
all of the Modbus TCP addresses categorized by coil status, input status, holding register, and input register.
To change Modbus addresses, users can click Reload default Modbus address, Reload current device
address, or manually modify the addresses.