ioThinx 4510 Series Software Tools
If all services are disabled, this device will no longer be accessible, and you will need to load the factory
default configuration
s to access the device.
For security reasons, we suggest disabling those services that your application will not use.
Because of device limitations, MQTT
, RESTful API, and SNMP cannot be used at the same time.
Web Service via HTTPS is designed for configuration purposes. Because of device limitations,
the https web
only works with Web service, IOxpress, MCC Tools, and MXIO.
Before using the web service, import the self
-signed certificate via https. Otherwise, the browser may block
User Settings
Enable/Disable user type, or configure the username and password for Administrator, Operator, and Users.
Type: Select a user type to change the username and password.
Enable: Enable or disable the type you select.
New Username: It allows you to change the username of the selected user type (Must be 1 to 30
characters in length. Letters, numbers, and symbols are allowed, but not spaces).
Admin Password: Type the password for the administrator to gain authorization to make changes.
New Password: It allows you to change the password of the selected user type (Must be 4 to 16
characters in length and include at least one number and one symbol. Letters, numbers, and symbols are
allowed but spaces are not).
Confirm Password: Type in your new password again.
To Next Page
Need help?
General
