Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Quick Start Guide
5-21
2. Follow the steps to load the factory default settings from IOxpress.
Step 1: Select Load Factory Default from the dropdown menu.
Step 2: Select the device(s), type the Username and Password, and then click Submit. IOxpress will
start to perform the task on the selected devices. The success message will show up in the Result
column when the process has been completed.
INFORMATION
Click
Apply to All if the selected devices have the same settings.
3. Hold down the RESET button for 10 seconds to load factory default settings. The system will load the
default settings and then restart the device. The system is ready when the RDY LED turns green.

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English