Command #176: Write Average Interval
Writes the Ultima Average Interval. This interval is in hours and is used
by the device to determine the collection interval for Minimum,
Maximum and Average values. The Average collection interval can be
for 1, 8 or 24 hours.
Request Data Bytes
BYTE FORMAT DESCRIPTION
0 Unsigned Average Interval
Response Data Bytes
BYTE FORMAT DESCRIPTION
0 Unsigned Average Interval
Command-Specific Response Codes
CODE CLASS DESCRIPTION
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too few data bytes
6 Undefined
7 Error In write protect mode
8-15 Undefined
16 Error Access Restricted
17-31 Undefined
32 Error Busy
33-127 Undefined
D-17