© Munters AB, 2020 108
o
Water Overflow Max Water/Hour: Trio sends an alarm if the water flow
exceeds this amount.
o
Water Shortage:
Min Water/Hour: Trio will send an alarm if the water flow is less than
this amount. Range: 0 – 999 gallons/liters.
Enable Water Shortage Alarm: Define the period in which the alarm is
active, 24 hours a day or specific time frames.
o
Potentiometer: Enable Potentiometer Alarm: Trio will send an alarm if
potentiometer-controlled inlets are not opening to the required levels.
Define the period in which the alarm is active, 24 hours a day or specific time
frames.
16.1.2
A
LARM
T
EST
The alarm test confirms that the alarm system is functioning properly. A test can be
performed manually at any time or scheduled weekly or daily.
•
Manual Test
•
Scheduled Tests
16.1.2.1
Manual Test
•
Click . Stop the test as needed.
16.1.2.2
Scheduled Tests
Scheduled tests can be performed once a day only.
1. On the Alarm Screen, enable Scheduled Alarm Test.
2. Define the day(s) and time at which the test is performed.