© Munters AB, 2020 46
In the above example, at level 0 Fan 1 rotates with Fan 2. At level 2, Fans 1 and 2
rotate while Fan 3 remains constant.
7.2.3
I
NLET AND
C
URTAIN
V
ENTILATION
In Basic Ventilation, Trio enables control over the inlets using one of two methods:
•
Level Control
•
Static Pressure Control
NOTE Outlet control is by level only.
To select the inlet control method:
1. G
o to System > Control Strategy > Ventilation .
2. Under Inlet Operation Mode, select Level or Pressure.
To Next Page
Loading...
