Munters Trio Poultry Controller User Manual

© Munters AB, 2020 64
8.2.3 R
AMPING
C
OOLING
• Define:
o
Growth days at which the settings change. Define up to four days.
o
Enable: Enable or disable a cooling device.
o
Start temperature (diff): Sets the temperature differential from the cooling
temperature (Temperature Curve) to activate cooling. The calculated
temperature to start cooling is adjusted according to the growth-days.
NOTE Each cooling device operates according to its own temperature (Temperature
Definition).
o
Stop temperature (diff): Sets the temperature differential from the cooling
temperature (Temperature Curve) to stop cooling device.

Stop cooling device temperature = Cooling Target ± Stop temperature
o
Enable from ventilation Level: Select the level (ventilation output) to enable
cooling operation. (Default 1).
o
ON Time: Describe the amount of time the cycle is ON. This number is a
constant and does not change.
o
Ramping Maximum/Minimum OFF Time (sec): Define the maximum and
minimum off time that cooling devices remain off after having operated
during the ON time.
o
Ramping Range T°: Sets a temperature range to modulate the cooling device
off cycle. When cooling starts, the off time will be the maximum off time. As
the temperature rises to the band maximum, the maximum off time
decreases to the minimum.
o
Humidity Limit: Enable stopping cooling at a certain humidity level.

Munters Trio Poultry Controller Specifications

General

Brand	Munters
Model	Trio Poultry Controller
Category	Controller
Language	English