Munters Trio Poultry Controller - Levels of Ventilation; Configuring the Basic Ventilation Settings

© Munters AB, 2020 36
7 Levels of Ventilation
• Configuring the Basic Ventilation Settings
• Basic Ventilation
• Extra Ventilation
• Tunnel Ventilation
• Calibrating the Inlet/Tunnel Door
• Stir Fan
7.1 Configuring the Basic Ventilation Settings
 Map at least one fan and one inlet before beginning.
1. Go to Climate > Ventilation and click
.
2. Define:
o
Efficiency Maximum: Refer to Fans (Efficiency Fan)
o
Ventilation Tuning: This parameter determines how aggressively the Trio
responds to differences between the measured temperature and the target
temperature.
CAUTION Munters recommends leaving this paramter at Normal.
o
Min Cycle Off Time (sec.): Refer to Minimum Ventilation Cycle, page 40.
o
Total Cycle Time (sec.): Total time in ventilation cycle.