Margin
You can arrange the document image by shifting vertically and horizontally to
add an appropriate margin for copying.
• The document image is shifted according to a set margin, so a part of the document
could run off the paper when copied.
• Even if you set the magnification in [Zoom], it does not affect the margin value.
• For the duplex copy function, the same amount of margin is set on the front and
back sides symmetrically (horizontally or vertically).
1
Load your document and press <Copy>.
2
Press <Menu>.
3
Select “Margin” using the cursor keys and press [Enter].
4
Press [Edit].
5
Press [Binding] to select the margin position.
6
Enter the margin value using the numerical keys or cursor keys.
You can enter the margin value in the range from 01 mm to 30 mm.
When all margins are 0 mm, the margin setting is set to OFF.
7
Press [Enter].
The margin icon ( ) is displayed on the standby screen.
8
Set other functions as necessary.
9
Press <Start>.