Registration Default: Off
1
Press <Menu>, <5>, <1>, <1>, <7>, [Enter].
2
Select “Setting” and press [Enter].
3
Select a mode and press [Enter].
If you select “Off” or “Mode 1”, the setting procedure finishes here.
Block Junk Fax
Off Mode3
Mode1
Mode2
Cancel Enter
Press [Close] to return to the standby screen.
If you select Mode 2 or Mode 3
Enter the destination number from which you want to block faxes.
4
Select “Enter/Edit” and press [Enter].
5
Select a registration box and press [Enter].
Block Junk Fax:Mode2
01:<Not registered>
Close Enter
To change a registered number, select it and press [Enter].
6
Enter the lower 4 digits of the fax number that you want to block
the reception from, using the numeric keys, and press [Enter].
Block Junk Fax:Mode2
Enter the last 4 digits
1122_
CancelClear Enter
7
To continue to enter other numbers, repeat from step 5.
8
Press [Close] to return to the standby screen.
DB2-90290-60.indb 18 2007/02/02 12:33:39
To Next Page
Loading...
Need help?
General
