Entering/Editing Functions
8-7
8
Fax Function Settings
Entering method 2: Entering a number from the
numeric keys
You can enter a destination number into a speed dial entry using the numeric
keys.
1
Press <Fax> to switch to the fax mode.
2
Enter a destination number using the numeric keys.
3
Press [
], [Register].
Enter Fax Number
1230000000
_
Prefix:
RegisterDialOpt. Group
Not Registered
Would you like to enter?
S002
Yes No
An unregistered speed dial with the smallest number is displayed.
5
The following operation is same as step 4 through 11 in “Entering/
Editing” (page 8-3).
Deleting a speed dial
1
Press <Menu>, <1>, [Enter].
2
Select the speed dial you want to delete using the cursor keys and
press [Delete].
Speed Dial S006 2/67
004:U.K sales company
005:Paris Office
006:China Office
CloseDelete Edit
You can also select by entering a speed-dial number using the
numeric keys.
You cannot delete speed dials being used for a transmission in progress,
or reserved transmission, until said transmissions are complete.
You cannot delete the speed dials being used for the F-code relay box
or fax forwarding functions.
•
•
•
DB2-90290-60.indb 7 2007/02/02 12:33:46