Entering/Editing Functions
8-21
8
Copy Function Settings
Copy Default Settings
You can set defaults of the copy functions. The defaults are the initial setting
values to which the current settings return when you press <Reset>. Set them as
desired.
Setting the default
1
Press <Menu>.
2
Press [Settings].
3
Select “Copy Settings” using the cursor keys and press [Enter].
Settings 2/3
Copy Settings
Fax Settings
Scanner Settings
Close Enter
4
Select “Default Settings” using the cursor keys and press [Enter].
To shortcut the process, press <Menu>, <4>, <0>, <1>, [Enter].
5
Select the item you want to set using the cursor keys and press
[Enter].
6
Change the default. For details about setting items, refer to the
following “Copy default settings list”.
7
After setting, press [Close] to return to the standby screen.
If you enter the function number in the copy default settings list after pressing
<Menu>, and press [Enter], you can directly open the screen for the desired item.
DB2-90290-60.indb 21 2007/02/02 12:33:53