Energy save mode
If you do not perform any operations for approximately 15 minutes, the machine
automatically switches to the energy save mode and reduces power consumption.
The energy save mode consists of the “Low power mode” and the “Sleep mode”
which reduces power even further.
To activate the energy save mode or cancel it manually, press <Energy Save>.
You can set whether the energy save mode is automatically canceled or starts
after a specified time. For details on settings, refer to “Energy save mode” under
“Management Settings” (page 8-37).
Fax Ready Fax Mode
2 Apr 2007 13:30 Memory:100%
Resol.
Normal
Contrast
Normal
ScanSize
Auto
1/2
Low power mode
• If you do not perform any operations for approximately 15 minutes, the
machine automatically switches to low power mode. You can set the time
for the machine to go into low power mode from between 1 to 100 minutes.
For details on settings, refer to “Energy save mode” in “Management
Settings” (page 8-37).
• To activate the low power mode manually, press <Energy Save>.
• While in the low power mode, <Energy Save> illuminates in green, and
the display and other lights go OFF.
• To get out of the low power mode, press any key on the control panel.
Sleep mode
• When the low power mode continues for approximately 60 minutes, the
machine automatically switches to sleep mode. You can set the time for
the machine to go into sleep mode from between 30 to 120 minutes. For
details on settings, refer to “Energy save mode” in “Management Settings”
(page 8-37).
• To activate the sleep mode manually, press and hold <Energy Save> for
approximately 3 seconds.
• While in the sleep mode, <Energy Save> illuminates in red, and the
display and other lights go OFF.
• To get out of the sleep mode, press <Energy Save>.
• Even while in the energy save mode, documents scanned into memory can be
transmitted, fax documents can be received, and print jobs can be received from a PC.
• The machine does not switch to the energy save mode in the following cases:
• While scanning a document
• When a document is loaded on the ADF
• When printer errors such as a paper jam or shortage of toner occur
• When paper in all the paper cassettes runs out
• When printing a copy or fax
• When the cooling fan is rotating inside the machine
• The energy save mode is canceled in the following cases.
• When receiving a fax (The display is left OFF)
• When receiving a print job from a PC (The display is left OFF)
• When an error list is automatically printed
DB2-90290-60.indb 21 2007/02/02 12:31:30
To Next Page
Loading...
Need help?
General
