5
Load the next document on the document glass or the ADF, press
[Scan NextPage] or <Start>.
Scanning the next document starts. When you want to scan the next
document further, repeat from step 4.
Scan
NextPage
Scanning
End 1/2
Please Set next doc
Ratio Auto Memory: 97%
Paper 1:A4
6
When you finish scanning all the documents, press [Scanning End].
Copying starts.
• The default settings of “Next Doc” are “No” for the ADF, “Yes” for the document
glass.
• If you set “Next Doc” to “No” during scanning, copying starts when scanning is
completed.
• When you press [
] in step 5, you can set the document type, contrast or zoom for
the next document.
DB2-90290-60.indb 7 2007/02/02 12:31:55
To Next Page
Loading...
Need help?
General
