5-23
5.3.3 Setting Mode: “Liquid Crystal Display Contrast Adjustment” (Contrast)
Touching [Setting] on the initial screen of the system menu and then the [Contrast] key of the setting
mode menu displays the contrast adjustment screen. The contrast of the GT main unit LCD is adjusted
here.
Contrast adjustment screen
Procedure for bringing up the screen
[Initial screen]
↓
[Setting]
↓
[Contrast]
Touch panel operation:
[ADJUST] Touching the [+] key increases the contrast, and touching the [-] key decreases it. The values
and the ♦ mark are the value set. The standard value is 7 and when the ♦ mark is located at
the center.
[RETURN] To complete the settings and return to the previous screen, touch the [ESC] key.
Adjust to the best contrast depending on your needs.
To Next Page
Loading...