NAiS GT Series - Connecting to the COM. Port of FPΣ; FP0; FP-E

4-10
4.1.9 Connecting to the COM. port of FPΣ
ΣΣ
Σ / FP0 / FP-e
Connecting to the FPΣ
ΣΣ
Σ COM. 1 and COM. 2 cassettes
Connecting to the FPΣ
ΣΣ
Σ COM. port
Connecting to the FP0 COM. port
Note:
• We do not provide a dedicated cable for hard wiring to the FP0 COM port. Please provide your own
cable. If you provide a cable for this purpose, please note the following.
• Please use AWG #28 to 16 size shielded cable (with a conductor cross sectional area of 0.08 to 1.25
mm
2
).
Reference: <4.1.15 How to Make Communication Settings Using the FPWIN GR>