1-4
1.1.6 Serial Interface
GT01 specifications
RS232C type RS422 type
Item
AIGT0030B1/AIGT0030H1
AIGT0030B/AIGT0030H
AIGT0032B1/AIGT0032H1
AIGT0032B/AIGT0032H
Communications ratings
Conforms to RS232C
(Non insulation type)
Conforms to RS422
(Non insulation type)
Conditions for
communications with
external devices
Baud rate: 9600, 19200, 38400, 57600, 115200 bps
Data bits: 7 or 8 bits
Parity: Non, Odd, Even
Stop bit: 1 bit
Protocol
Supports MEW FP Series/General-purpose Serial/Mitsubishi FX
Series/Mitsubishi A (calculator link) Series/Omron SYSMAC-C
Series/Modbus (RTU)/Siemens S7-200 Series/Toshiba Machine
PROVISOR TCmini Series/Yokogawa FA-M3 Series/Allen-
Bradly SLC500 Series/LG MASTER-K (Cnet) Series
COM.
port
Connector
Connector terminal base (8-pin)
* Regarding power supply voltage, please pay due consideration
to the cable length so that the applied voltage is within the
operation voltage range. Also, when supplying power from a
power supply separate from the PLC, please make sure the
power cable is no longer than 10 m.
Communications ratings Conforms to RS232C (Non insulation type)
Conditions for
communications with
external devices
Baud rate: 9600, 19200, 115200 bps
Data bits: 8 bits
Parity: Non, Odd, Even
Stop bit: 1 bit
Protocol Dedicated protocol
TOOL
port
Connector Mini-DIN (5-pin)
Note1) RS232C data transmission speed is 19,200 bit/s and the maximum cable length is 15 m.
Note2) Maximum cable length for RS422 data transmission is 30 m for the 5 V type and 500 m for the
24 V type.
Note3) When running a 5 V type directly with the PLC power supply, please comply with the PLC
restrictions. For this reason, you may not be able to use at the distances given above.
Reference:
For information on connecting and wiring the cables, refer to <Chapter 4 Connecting and
Communicating with the PLC> and <GTWIN HELP>..
To Next Page
Loading...