NAiS GT Series - Exiting GTWIN

10-9
10.4 Exiting GTWIN
Exiting GTWIN
1. Select [Exit] on the “File” menu.
To exit GTWIN, select “Exit” on the “File” menu.
2. Save the file.
If screen data has been edited but has not yet been saved, a message like that shown below is
displayed on the screen. Click on [Yes] to save the data.
Key Point:
GTWIN can also be exited by pressing [Alt] + [F4], or by clicking on the “Close” box at the upper right of
GTWIN screen.