5-30
5.4.3 Setting Mode: “Clock Settings” (Clock)
Touching [Setting] on the initial screen of the system menu and then the [Clock] key of the setting mode
menu displays the clock setting screen. The internal clock of the GT30 is set here.
Clock setting screen
Procedure for bringing up the screen
[Initial screen]
↓
[Contrast]
The time displayed on the screen is the current time indicated by the internal clock of the GT30. Items
can be changed by touching the item (year, month, day, hour, minute, second) and touching the [+] and
[-] keys to change the values.
Touch panel operation:
[ADJUST] Touching the [+] key increases the contrast, and touching the [-] key decreases it.
[SET] Touching the [SET] key updates the Value Set and restarts the clock. Touching the [ADJUST] key
sets the seconds value of the current time to “00”. A seconds value of 0 to 29 is rounded off to the
next lower value, and a seconds value of 30 to 59 is rounded off to the next upper value.
Example:
If the time is set to 12 (hours) : 35 (minute) : 29 (seconds)
→ 12 (hour) : 35 (minute) : 00 (seconds)
If the time is set to 12 (hours) : 35 (minutes) : 30 (seconds)
→12 (hour) : 36 (minute) : 00 (seconds)
[RETURN] To complete the settings and return to the previous screen, touch the [ESC] key.
Explanation of this function:
Setting the day
The day is set automatically, based on the year, month, and date data.
To Next Page
Loading...
Need help?
General
