NAiS GT Series - Setting Mode: Touch Switch Adjustment (T. SW)

5-25
5.3.5 Setting Mode: “Touch Switch Adjustment” (T. SW)
Touching [Setting] on the initial screen of the system menu and then the [T. SW] key of the setting mode
menu displays the touch switch adjustment screen. The position of the GT main unit touch switch is
adjusted here.
Touch switch adjustment screen
Procedure for bringing up the screen
[Initial screen]
↓
[Setting]
↓
[T. SW]
Touch panel operation:
[ADJUST] Touch the “+” mark with a soft, narrow instrument. Toucch the “+” mark three times as
displayed on the screen. Please repeat if the touch position has shifted greatly. You will not
lose this setting when the power is turned off. The setting will be initialized when the F-ROM
memory is initialized.
[RETURN] To complete the settings and return to the previous screen, touch the [ESC] key.