4-21
4.1.18 Connecting a PLC by Mitsubishi Electric Corporation
Connecting to the TOOL port of FX series (1) (Direct connection to GT01)
PLC communication cable: Mini-DIN 8-pin loose-wire cable (AIGT8152)
Tool port connection of GT01 and FX Series
Note:
• Keep the cable no longer than 2 m
• GT01 power consumption corresponds to that of Mitsubishi’s F920 (5 V type) display device. When
using, adhere to the conditions of use (number of units that can be expanded on a PLC, etc.) for the
F920 (5 V type).
To Next Page
Loading...