10-7
11. When this screen is displayed, click on [OK].
When the installation has been completed, a
message like that shown here is displayed. Click on
[OK].
The application required in order to access the Help
function is installed.
If this emssage does not appear, reboot the
computer as described in step (12).
12. Reboot the computer.
When all of the process has been completed, a
dialog box is displayed, confirming that the
computer will be rebooted.
Note:
To use GTWIN, the compuer must first be rebooted. Make sure this is done before attempting to use the
program.
To Next Page
Loading...