ii
Other precautions
• Do not connect any devices other than our Programmer II to the TOOL port.
• Always operate the touch panel with fingers as the touch panel may be damaged due to the excessive
load or shock (caused when being operated with any tools). Also, if the touch panel is pressed like
kneading, the electrode may be worn out exceptionally, and cause the malfunction. Operate with a
single touch of the panel.
• Do not disassemble, reassemble or remodel the GT main unit as we cannot assure the performance if
you have done such things.
Battery
Do not leave the battery in the unit when it is not used. There is a possibility of leak if it is left being
discharged.
To Next Page
Loading...
Need help?
General
