NAiS GT Series - Page 96

4-36
Usable devices
Device type
I/O relay
Internal auxiliary relay
Analog setting storage area
Special auxiliary relay
Data link relay (LR)
Auxiliary memory relay (AR)
Hold relay (HR)
Timer (contact) (TIM)
Bit device
Counter (contact) (CNT)
I/O relay
Internal auxiliary relay
Analog setting storage area
Special auxiliary relay
Data link relay (LR)
Auxiliary memory relay (AR)
Hold relay (HR)
Timer (current value) (TIM)
Counter (current value) (CNT)
Word device
Data memory (DM/D)
Note1) The range of usable addresses differs depending on the model. For details, please consult the
manual for the PLC you will use.
Note2) Data area 253 to 255CH cannot be written to.
Note3) The data link relay (LR), hold relay (HR), timer (TIM) and counter (CNT) of the J1 series cannot
be used.