Name: Napoleon Vector Series
Brand: Napoleon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

W415-2034 / A / 10.18.19

electrical information

6.6 access panel

Before ﬁ nishing in the appliance, test the operation using the remote control, cycling it through all of its different

modes, see owner’s manual. Once ﬁ nished in, access to the control components can only be done through the

inside of the appliance.

Pre-ﬁnishing access panel

WARNING

• Do not use this appliance if any part has been under water. Call a qualiﬁ ed service technician immediately to

have the appliance inspected for damage to the electrical circuit.

• Risk of electrical shock or explosion. Do not wire 110V to the valve or to the appliance wall switch. Incorrect

wiring will damage controls.

• All wiring should be done by a qualiﬁ ed electrician and shall be in compliance with local codes. In the

absence of local codes, use the current CSA22.1 Canadian Electric Code in Canada or the current National

Electric Code ANSI/NFPA NO. 70 in the United States.

• Always light the pilot whether for the ﬁ rst time or if the gas supply has run out, with the glass door opened or

removed.

LV38-1 Illustrated

Other manuals for Napoleon Vector Series

Questions and Answers:

Need help?

Do you have a question about the Napoleon Vector Series and is the answer not in the manual?

General