MASCHINE 1.5 Reference Manual – 158
9 Using FX
9.1 Adding FX to a Sound
You can apply two Effects directly to each Sound as Insert Effects.
Hardware
1. In Control Mode, press Button 4 to put the focus on the Sound Tab which gets selected
on the Left Display, then hit the Pad with the Sound you want to apply the Effect to. On
the Right Display, you can now see the Modules FX1 and FX2. Select FX1 by pressing
Button 6 or FX2 by pressing Button 7.
The Right Display showing the Modules FX1 and FX2 with FX1 selected
2. To select an Effect for the selected FX Module, press SHIFT followed by BROWSE. The
Right Display now shows the list of the available Effects.
The Right Display showing a list of available Effects
3. You can browse through the available Effects by turning Knob 5. When you’ve found an
Effect you want to apply, press Button 8 to load it into the FX Module. You can also use
Buttons 5 and 6 to step through the list and immediately load the selected FX.
To Next Page
Loading...
