MASCHINE 1.5 Reference Manual – 58
3.2.1 Importing a Sample into the Library
Selecting a Sample on your hard drive
After you have found your Sample, you can add it to the Library by clicking the I
mport
B
Utton
.
If you want to add multiple les at once, such as a folder of your favorite Samples, you can
select the whole folder and tag all les at once using the same dialog as when importing
single les. You can also make non-contiguous selections within a directory by clicking while
holding down the Ctrl key (PC) or the Command key (Mac). After pressing Import, you will
be presented with the Tag Editor to tag the Sample(s) you are about to import to the Library.
To Next Page
Loading...
