MASCHINE 1.5 Reference Manual – 127
%
To “draw” Automation, check the box labeled “Paint” at the bottom and click-drag in
the Automation Lane.
7.2.6 Adding a Modulator
Another way to create automation is to draw it with the mouse. On the left of the Automation
Lane you will see the Add Modulator dropdown menu. Clicking on it opens a list of automat-
able parameters for the selected Sound of the current Pattern:
The Add Modulator dropdown menu showing a list of automatable parameters.
In the Automation Lane, you can now add automation points for the selected parameter by
clicking in it, even if there is no note data present. The automation points will snap to the
selected Step Grid.
If you want to automate Group parameters, just click on the Group Tab in the Control Area
to be presented with available parameters of the Group.
To Next Page
Loading...
