MASCHINE 1.5 Reference Manual – 217
14.2 Loading and Saving
Loading a File from the Browser
1. Press BROWSE to enter Browse Mode.
2. Select the target tab with Buttons 2 - 4.
3. Select the le type by turning Knob 1.
4. Set attribute lters with Knobs 2 - 4.
5. Select a le dialing Knob 5.
6. Load it by hitting Button 8
7. Press BROWSE to exit Browse Mode
Saving a Project Press SHIFT and SNAP (F1)
14.3 Scene Operations
Switching Scenes
Press and hold SCENE; now select the Scene with the
Pads.
Switching Scene Banks
Press and hold SCENE; now use Button 5-8 to switch
Scene Banks.
Skip 1 Scene forward Press SCENE and > in the Transport Section.
Skip 1 Scene backward Press SCENE and < in the Transport Section.
Nudge left Press SCENE and Page Button ‘<’.
Nudge right Press SCENE and Page Button ‘>’.
Duplicate Scenes
In Scene Mode, press and hold DUPLICATE, tap the Pad
of the Scene you want to copy, then tap the Pad where you
want to paste the Scene.
Delete Scenes
Press and hold ERASE together with SCENE and then the
Pad of the Scene you want to delete.
Setting a Scene Loop
In Scene Mode, press and hold the start Scene of your
Loop followed by the end Scene.
To Next Page
Loading...
