MASCHINE 1.5 Reference Manual – 21
1.5.5 Connecting the MASCHINE Controller
Plug the USB cable (included in the package) into the USB port on the back of the MASCHINE
Controller, and connect the cable’s other end to one of the USB-ports of your computer.
!
If you want to run the MASCHINE Controller on a USB-hub instead, make sure the hub
has its own power supply - the MASCHINE Controller will not work on a passive (bus-
powered) USB hub.
If you have any MIDI equipment such as synthesizers, keyboards, drum machines or samplers,
you may connect them to MASCHINE’s MIDI In and MIDI Out ports.
MASCHINE Controller, rear panel:
1 MIDI Out
2 MIDI In
3 USB socket to connect to your computer.
4 Kensington Lock slot to lock your MASCHINE Controller to something immobile.
To Next Page
Loading...
