Native Instruments Maschine - Pre MIX Options

MASCHINE 1.5 Reference Manual – 76
Main
oUtpUt
This is used to dene where you want to send your Sound.
Available options are Master, Group, any other Sound
within the Project whose Source type is set to Input, the
External Outputs 1-8, and None.
lEvEl Here you adjust the overall volume level of your Sound.
pan Denes the pan position of your Sound in the stereo eld.
%
If MASCHINE is running as a plug-in, the External Outputs will correspond to virtual
outputs in your host. This allows you to send individual Sounds from MASCHINE to their
own mixer channel within your DAW, for example.
Aux 1
dEStInatIon
The destination for Aux 1: available destinations are
Master, Group, all Sounds with Input enabled, the External
Outputs 1-8 and None.
lEvEl
Here you adjust the level of the signal that gets sent to the
Aux 1 destination.
Aux 2
dEStInatIon
The destination for Aux 2: available destinations are
Master, Group, all Sounds with Input enabled, the External
Outputs 1-8 and None.
lEvEl
Here you adjust the level of the signal that gets sent to the
Aux 2 destination.
4.4.2 Page 2: Pre Mix Options
Page 2 of 2 from the Sampler Output Tab on the Hardware