MASCHINE 1.5 Reference Manual – 218
Select the Sync Grid Press and hold GRID, then Button 2.
Change Sync Grid Value
A) Press and hold GRID, then step through the values with
< or > in the Transport Area.
B) Press and hold GRID, then select a value by pressing a
Pad.
14.4 Pattern Operations
Locking Pattern Mode Press PATTERN followed by Button 1.
Selecting Patterns
Press and hold PATTERN; now select the Pattern with the
Pads.
Selecting Pattern Banks
Press and hold PATTERN; now use Button 5-8 to switch
Pattern Banks.
Duplicate Patterns
In Pattern Mode, press and hold DUPLICATE, tap the Pad
of the Pattern you want to copy, then tap the Pad where
you want to paste the Pattern.
Delete Patterns
Press and hold ERASE together with PATTERN and then
the Pad of the Pattern you want to delete.
Loading a Pattern
1. Press BROWSE and then Button 3.
2. Set the Filter to „Pattern“ by turning Knob 1.
3. Select a Pattern by dialing Knob 5.
4. Load it by hitting Button 8.
Select the Length Grid Press and hold GRID, then Button 3.
Setting the Length Grid Value
A) Press and hold GRID, then step through the values with
< or > in the Transport Area.
B) Press and hold GRID, then select a value by pressing a
Pad.
To Next Page
Loading...
