Native Instruments Maschine Reference Manual

MASCHINE 1.5 Reference Manual – 163
The EQ applied to a Group
%
Some of the Effects will have more than one parameter page; in this case, use the Page
Selector to navigate between them. You can also load FX Presets from the Browser either
by double-clicking them or by dragging them to the FX Slot you want to use.
9.3 Adding FX to the Master
You can apply two Effects to the Master so that all your Sounds and all your Groups together
are being sent into the Effect.
Hardware
1. Press Button 2 to put the focus on the Master Tab which gets selected on the Left Display.
2. On the Right Display, you can now see Modules FX1 and FX2. Select one of them by
pressing Button 6 (for FX1) or Button 7 (for FX2). To load an Effect for a FX Module,
press SHIFT followed by BROWSE. The Right Display now shows the list of the available
Effects.You can browse through them by either turning Knob 5, or using Buttons 5 and
6 you can directly load them.
The list of available Effects for the Master on the Right Display
3. When you’ve found an Effect you want to apply, press Button 8 to load it into the selected
FX Module.

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs