MASCHINE 1.5 Reference Manual – 70
4.2.3 Page 3: FX and Filter Settings
Page 3 of 6 from the Sampler Source Tab on the hardware
Page 3 of 6 from the Sampler Source Tab on the software
4.3 FX
This is a small selection of basic FX, not to be mixed up with the FX section covered in depth
in chapter 9, ”Using FX.”
FX Controls
Comp
Basic compressor allowing you to give a Sound more den-
sity.
drIvE Denes the amount of saturation applied to a Sound.
Sr
SR stands for sample rate: you can use it to lower the orig-
inal sample rate in order to give a Sound a lo- touch.
BItS
Allows you to lower the original bit rate of the Sound, re-
sulting in a more rough, digital sounding lo- effect.
To Next Page
Loading...
