MASCHINE 1.5 Reference Manual – 222
14.12 Basic Sampling
Sampling from an external Source
1. Press SAMPLING.
2. Set the Source to „Extern“ using Knob 1.
3. Choose your Input Source by dialing Knob 2.
4. Dial Knob 4 to set the recording threshold level.
5. Press Button 5 to start the recording.
Sampling from an internal Source
1. Press SAMPLING.
2. Set the Source to „Intern“ using Knob 1.
3. Choose your Input Source by dialing Knob 2.
4. Dial Knob 4 until the Threshold reads 0 dB.
5. Press Button 5 to start the recording.
To Next Page
Loading...
