Native Instruments Maschine - Managing Sounds, Groups, and Your Project; Overview of the Sounds, Groups, and Master

To Next Page

To Previous Page

MASCHINE 1.5 Reference Manual – 160

The dropdown menu of the FX1 Module showing the Effects

After selecting the Effect with the mouse, you will nd the parameters displayed in the

FX Module:

The parameters of the Reverb, ready to be tweaked

Some of the Effects will have more than one parameter page; in this case, use the Page

Selector to navigate between them. You can also load FX Presets from the Browser either

by double-clicking them or by dragging them to the FX Slot you want to use.

9.2 Adding FX to a Group

You can apply two effects (FX) directly to each Group. The effects will then be applied to all

the Sounds which send their audio output to the Group.

Hardware

Press Button 3 to put the focus on the Group Tab which gets selected on the Left Display,

then press the Group Button of the Group you want to apply the Effect to. On the Right

Display, you can now see the Modules FX1 and FX2. Select FX1 by pressing Button 6

or FX2 by pressing Button 7.

Other manuals for Native Instruments Maschine