MASCHINE 1.5 Reference Manual – 16
1.4.3 Using the unit safely
Before using this unit, it is important that you thoroughly read the instructions below. This will
provide you with the information needed for setting up and using your MASCHINE Controller.
Warning
Do not open the MASCHINE Controller or attempt to disassemble or modify any internal parts!
The MASCHINE Controller does not contain any user-serviceable parts. If it appears to be mal-
functioning, discontinue use immediately and have it inspected by qualied service personnel.
Caution
It is important you read the following instructions to make sure the MASCHINE Controller or
any device connected will not be damaged during usage or maintenance:
• Do not expose the unit to rain, use it near water or in damp or wet conditions.
• Make sure no objects or liquids of any kind penetrate the unit.
•
Never use or store the unit in areas subject to extreme temperatures (e.g., direct exposure
to sunlight in an enclosed vehicle and/or near heat-generating equipment), or high levels
of vibration.
• Do not place the MASCHINE Controller in an unstable position where the unit could ac-
cidentally fall.
•
Turn off the power for all components before connecting the device to any other elec-
tronic components.
•
Set all volume levels to their minimum before switching any connected component on/
off. Gradually raise the volume controls while playing the instruments to set the desired
listening level.
• Remove all connected cables before moving the MASCHINE Controller.
•
Do not use force on buttons, knobs, switches and connectors, if any parts should appear
to be malfunctioning. Discontinue use immediately and have it inspected by qualied
service personnel.
•
When cleaning the MASCHINE Controller, use a soft, dry cloth. Never use paint thinners,
solvents, cleaning uids, or chemical-infused wiping cloths.
To Next Page
Loading...
Need help?
General
