MASCHINE 1.5 Reference Manual – 172
3.
Now select another Group with content (in this case the 909 Kit Group) and click the
Output Tab (OUT) of the Sound you want to apply a Send Effect to (here: Snare 909):
The Output Tab
4.
You can see the two Aux Sends, Aux 1 and Aux 2. In the dropdown menu of Aux 1, select
H: Input 1 to send the (Snare 909) Sound to the Effect in the Sound “Input 1” of the
Group H (in our example):
Choosing Aux1 Send
→
As you can hear, the Snare 909 Sound is already being sent to the Effect; by turning
the Aux 1 Level, you can adjust the amount of signal that gets sent into it.
To Next Page
Loading...
