MASCHINE 1.5 Reference Manual – 187
SynC
If Sync is selected, you can synchronize the recording func-
tion to the sequencer, so that the recording starts in sync
with the sequencer after you hit START (Button 5).
Note: the recording will start as soon as the sequencer
starts; if it is already running, the recording will start at the
top of the next bar. Using Knob 4, you can choose a length
for the Sample to be recorded: either 1, 2, 4, 8, or 16 bars
or choose Free if you want to stop the recording yourself.
Start
Start (Button 5) will start the recording. If you have select-
ed SynC, MASCHINE will wait for the next bar before start-
ing to record; if you have selected Detect, the recording will
start as soon as the Threshold value is met. Cancel (Button
6) cancels the recording; the recorded Sample will not be
saved. Cancel is only available after starting the recording
using Button 5.
dElEtE
All Samples are stored in the Recording History. Using
Button 6 you can delete Samples you have recorded from
the Recording History.
prEv
Hitting Button 7 allows you to select the previous Sample
in case you have recorded more than one in this Sound
Slot. Note: to play the Sample, just hit the Pad represent-
ing the Sound Slot you used for sampling.
nExt
Hitting Button 8 allows you to select the next Sample in
case you have recorded more than one in this Sound Slot.
%
If you want to start and stop the recording manually, leave the Mode set to Detect, dial
the Threshold up to 0 dB and start the recording by pressing Start (Button 5). To stop
recording, press Stop (Button 5).
To Next Page
Loading...
Need help?
General
