MASCHINE 1.5 Reference Manual – 197
1 Source Settings
You can record Samples internally (check the Int radio button) from another Group, Sound or
the Master Output or from one of the External Inputs of MASCHINE: In 1 L, In 1 R, or In 1
L + R (check the radio button labeled Ext).
2 Mode Settings
In the next Panel of the Record Tab, you can select a way to start the recording: either by
setting a thrEShold value when you select the Detect radio button (adjustable with the mouse
by dragging up and down) or in Sync with the Project Tempo.
If you select the Sync radio button you can choose a length for the Sample to be recorded:
either 1, 2, 4, 8, or 16 bars; choose FrEE if you want to stop the recording yourself.
Entering the length in bars
3 Start, Stop and Cancel
S
tart
will start the recording. If you selected Sync, MASCHINE will wait for the next bar
before starting to record; if you have selected dEtECt, the recording will start as soon as the
Threshold value is met. The Start Button will change to Stop as soon as you press Start so
that you can stop the recording as soon as you choose. If you hit CanCEl, the recording will
be stopped and the resulting Sample will not be stored.
4 Input Meter / Direct Monitoring Icon
Shows the volume level of the input to be recorded; in Detect Mode you can drag the needle
to adjust the Threshold value. Click on the Direct Monitoring Icon to its right to enable direct
monitoring when sampling from an external source through your audio interface.
5 Info Bar
Shows the length of the Sample either in bars (when Sync Mode is selected) or seconds (when
Detect Mode is selected).
To Next Page
Loading...
Need help?
General
