CHAPTER 3 SYSTEM DATA PROGRAMMING
– 111 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
NOTE 3: When using the IP-PAD card with CODEC/IP-PAD channel without CODEC for the loca-
tion number of IP-CS, specify the IP-PAD group number by CM67 Y=18 and specify the
priority of the IP-PAD channel by CM67 Y=19.
1. Assign the IP-PAD group number for each location number for IP-CS (assigned by
CMAD Y=29) by CM67 Y=18.
2. Confirm whether there is an IP-PAD channel that uses 16VCT in the IP-PAD group as-
signed by CM67 Y=18. Assign the priority of the IP-PAD channel by CM67 Y=19 to
specify the IP-PAD channel automatically.
• When all IP-PAD channels are used, the system restricts the connection.
• IP-PAD channels will be periodically used from younger number.
H
CM67
Give priority to IP-PAD
channel without 16VCT
(CM67 Y=19>00-63:00)
No
No
No
Yes
Yes
Yes
Yes
Yes Yes
No
No
No
Give priority to IP-PAD
channel with 16VCT
(CM67 Y=19>00-63:01)
Use only IP-PAD
channel without 16VCT
(CM67 Y=19>00-63:02)
Use only IP-PAD
channel with 16VCT
(CM67 Y=19>00-63:
NONE)
Is there
any IP-PAD
channel without
16VCT
in the IP-PAD
group?
Is there
any IP-PAD
channel with
16VCT
in the IP-
PAD group?
Is there
any IP-PAD
channel with
16VCT
in the IP-PAD
group?
Is there
any IP-PAD
channel without
16VCT
in the IP-
PAD group?
Is there
any IP-PAD
channel without
16VCT
in the IP-PAD
group?
Is there
any IP-PAD
channel with
16VCT
in the IP-
PAD group?
Not use IP-PAD
channel
Use IP-PAD
channel with
16VCT
Use IP-PAD
channel without
16VCT
Not use IP-PAD
channel
Use IP-PAD
channel without
16VCT
Use IP-PAD
channel with
16VCT
I
CS DATA PROGRAMMING
To Next Page
Loading...
