NETGEAR GS308T User Manual

Get Started
16
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
WARNING:
When you change the IP address of your computer, you lose your
connection to the rest of the network. Be sure to write down your
current network address settings before you change them.
7. Click the OK button.
8. Close all other pop-up windows.
 To configure a static address on the switch:
1. Use a straight-through cable to connect the Ethernet port on the computer directly to
any port on the switch.
2. Open a web browser on your computer and connect to the local browser interface.
For more information, see Access the Local Browser Interface on page 19.
3. Change the network settings on the switch to match those of your network.
For more information, see Configure the IP Network and VLAN Settings for the Local
Browser Interface on page 38.
After you change the network settings on the switch, return the network configuration on your
computer to the original settings.

NETGEAR GS308T Specifications

General

Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Master (outer) case width	214 mm
Master (outer) case height	312 mm
Master (outer) case length	474 mm
Master (outer) case weight	6110 g
Harmonized System (HS) code	85176990
Quantity per master (outer) case	6 pc(s)
Package type	Box
Package depth	270 mm
Package width	226 mm
Package height	64 mm
Package weight	750 g
Cables included	AC
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Stackable	No
Product color	Black
LED indicators	Activity, Link, Power
Country of origin	China
10G support	-
Multicast protocols	IGMP
Input current	1 A
DC input voltage	12 V
MAC address table	- entries