NETGEAR GS308T User Manual

Specifications and Default Settings
342
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
General Feature Default Settings
The following table describes the general feature default settings.
RADIUS-assigned VLANs Disabled
Multiple Spanning Tree Disabled
Link aggregation No link aggregation groups (LAGs) configured
LACP system priority 32768
DiffServ Enabled
IGMP snooping Disabled
IGMP snooping querier Disabled
Table 66. General feature default settings
Feature Name/Setting Default
Virtual LAN (IEEE 802.1Q)
Default VLANs • 1 (Default). All ports are members.
• 2 (Auto-VoIP). No ports are members.
• 4089 (Auto-Video). No ports are members.
PVID 1
Acceptable Frame Types Admit All
Ingress Filtering Disabled
Port Priority 0
Jumbo Frames
Frame Size 1522
Flow Control
Admin Mode Disabled
802.1X
Port Based Authentication State Disabled
VLAN Assignment Mode Disabled
Dynamic VLAN Creation Mode Disabled
EAPOL Flood Mode Disabled
Table 65. Switch default settings (continued)
Feature Default

NETGEAR GS308T Specifications

General

Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Master (outer) case width	214 mm
Master (outer) case height	312 mm
Master (outer) case length	474 mm
Master (outer) case weight	6110 g
Harmonized System (HS) code	85176990
Quantity per master (outer) case	6 pc(s)
Package type	Box
Package depth	270 mm
Package width	226 mm
Package height	64 mm
Package weight	750 g
Cables included	AC
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Stackable	No
Product color	Black
LED indicators	Activity, Link, Power
Country of origin	China
10G support	-
Multicast protocols	IGMP
Input current	1 A
DC input voltage	12 V
MAC address table	- entries