EasyManuals Logo
Home>NETGEAR>Switch>GS308T

NETGEAR GS308T User Manual

NETGEAR GS308T
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #217 background imageLoading...
Page #217 background image
Manage Device Security
217
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
6. Select the Admin Mode Enable or Disable radio button.
This selection enables or disables secure HTTP (HTTPS). The default value is Enable.
Y
ou can download SSL certificates only when HTTPS is disabled. You can enable
HTTPS only if a certificate is present on the device.
7. In the HTTPS Port field, type the HTTPS port number
.
The range is from 1025 to 65535. The default is port 443.
8. In the HTTPS Session Soft T
imeout (Minutes) field, enter the inactivity time-out for
HTTPS sessions.
The range is from 1 to 60 minutes. The default value is 5 minutes.
9. In the HTTPS Session Hard T
imeout (Hours) field, set the hard time-out for HTTPS
sessions.
This time-out is unaffected by the activity level of the session. The range is from 1 to 168
hours.
The default is 24 hours.
10. In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number
of HTTPS sessions.
The range is from 1 to 4 sessions. The default is 4 sessions.
11. Click the Apply button.
Your settings are saved.
Manage Certificates for HTTPS Access
You can manage certificates for HTTPS access.
Generate an SSL Certificate
 To generate an SSL certificate:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.

Table of Contents

Other manuals for NETGEAR GS308T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS308T and is the answer not in the manual?

NETGEAR GS308T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
Master (outer) case width214 mm
Master (outer) case height312 mm
Master (outer) case length474 mm
Master (outer) case weight6110 g
Harmonized System (HS) code85176990
Quantity per master (outer) case6 pc(s)
Package typeBox
Package depth270 mm
Package width226 mm
Package height64 mm
Package weight750 g
Cables includedAC
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
StackableNo
Product colorBlack
LED indicatorsActivity, Link, Power
Country of originChina
10G support-
Multicast protocolsIGMP
Input current1 A
DC input voltage12 V
MAC address table- entries

Related product manuals