Get Started
19
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Software Requirements to Use the Local Browser Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
• HTML version 4.0, or later
• HTTP version 1.1, or later
Supported Web Browsers
The following browsers were tested and support the local browser interface. Later browser
versions might function fine but were not tested. The supported web browsers include the
following:
• Microsoft Internet Explorer (IE) version 11
• Microsoft Edge
• Mozilla Firefox version 50
• Chrome version 51
• Safari on Windows OS versions 5.1
• Safari on MAC OS X version 10.1
Access the Local Browser Interface
You must be able to ping the IP address of the switch from your computer for web access to
be available. If you used the Smart Control Center to set up the IP address and subnet mask,
either with or without a DHCP server, use that IP address in the address field of your web
browser. If you did not change the IP address of the switch from the default value, enter
192.168.0.239 in the address field.
You can use one of the following methods to access the switch local browser interface:
• From the Smart Control Center, select the switch and click the Web Browser Access
button.
• From the Switch Discovery Tool, select the switch and click the ADMIN PAGE button.
• Open a web browser and enter the IP address of the switch in the address field.
If you use any of these methods, the switch Login window displays.
 To access the switch local browser interface from a web browser:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
To Next Page
Loading...
Need help?
General
